MachTach Tachometer Enclosure
by henryarnold, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a design for an enclosure for the Half Size MachTach machine tachometer
The enclosure has top and bottom halves which fit together with a small lip. The sensor and power connectors are accessible from the side/back. The display and rotary encoder have openings on the top. There is a recess for the plastic lens material from inside the top half of the enclosure. The enclosure and MachTach module are all held together with four #4 x 1" sheet metal screws.
Update 1-29-2017: New version with better standoff support. The round pads are to hold the corners down during printing. They snap off after completion.
Update 7-12-2017: The optional bezel is for those that want to attach a laminated panel either purchased from MachTach or fabricated yourself. The bezel protects the panel from curling at the edges from use. The printed bezel is attached with Crazy glue if you are printing with PLA or other glue for other materials
extruder temp 200C
bed 40C on BuildTak or use your own settings
printed in PLA
Tools & Utilities Apps
Repair, slice, or enhance this Thing
MachTach Tachometer Enclosure by henryarnold is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving henryarnold a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure henryarnold would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).