Just another Door Wedge? or maybe not!
by DaleUK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Having a requirement for a couple of door wedge - hot sunny days etc, internal and external doors wide open - a slight breeze and 'SLAM - BANG' goes another door ........
After downloading a door wedge (which worked really well) and using it for a day, it came to putting it away in a draw - or somewhere?
How could I remember next time I needed it, where I'd put it?
This seemed like a good solution. You can fix the storage clip at the bottom of the door you use the wedge on with a double sticky pad or a couple of really tiny tacks (holes provided) - or both.
Convenient and right there when you need it - and you can scale each wedge/clip to custom fit each door gap if required!
Really easy to print .... scale both parts the same if you need to make the size different, but the standard size will probably fit most doors
Filament - PLA 1.75mm
Infill - 10%
Shells - 2
Layer Height - 0.30mm
Temp - 230C
Extrude Speed - 90mm/s
Travel Speed - 150mm/s
Increase the infill if the door is very heavy or large to make it stronger.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Just another Door Wedge? or maybe not! by DaleUK is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving DaleUK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DaleUK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).