This Bell Siphon was designed to suit an underbed storage container. The rockwool baskets are mounted into cut outs in the lid and the shipon should be placed in the base to suit the outlet arrangements.
The outlet hole will take an ordinary garden hose pipe to extend the delivery to the water tank.
The snorkel outlet can be extended to accommodate lower cut off levels using a short piece of 5mm tubing,
The main top water level can be adjusted by pushing the outlet hose pipe up through and into the bell siphon chamber
By printing a second base and nut the water feed into the container can be accommodated
Can be made using ABS or Pla Print the top base down and the siphon base with the screw part on the printer base