10/05/18 - ADded a threaded version so the top and bottom screw together for a more secure fit. It fits the Delta fan. Remember to screw together BEFORE attaching the servo to the LAN plug, or use fittings (servo plug) for a quick connect.
07/29/17 - Added new adapter with 1" NPT thread for screwing onto a 1" pipe nipple.
04/22/16 - Added a version of the top case and disc to accept the more reliable Tower Pro SG90 servo.
03/27/16 - Added another box design for version 2 (V2) to house John Bostwick's Heatermeter Aux. Board for thermocouple and 2 probes. Details of the board are here ... http://tvwbb.com/showthread.php?57901-Heatermeter-Aux-Thermocouple-And-two-probe-board-V6-1(Final-Version)
02/05/16 - Added a version 2 of the bottom case and box to reduce the amount of support material when printing.
01/15/16 - Added a 2 hole version of the top case and damper. Also removed the Rhino files until I can get them cleaned up a bit. I'll re-post them once I do.
Edit: Just realized I forgot to include the top disc for the damper. Called TopDamper.stl
EDIT: By demand, I've included the Rhino files used to create the STL files, if anyone needs to modify the design. I'm terrible when it comes to layer control, so things are a bit scattered.
Designed for the Sunon 50x20fan, but may work for the Delta fan prescribed by the heatermeter forum http://tvwbb.com/forumdisplay.php?85-HeaterMeter-DIY-BBQ-Controller
Print the box laid on it's side. It calls for alot of support, but it's the bsxt way to get a strong, oriented dovetail.