by ccsky6, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this Skyrim key chain using Autodesk Inventor. I printed it with ABS filament using my robotics team's XYZ da Vinci 1.0 printer on the "excellent" quality setting, slow print speed, 0.1mm layer height, and 90%(solid) infill density. I scaled the x-axis to be 1 inch(25.4 mm). Post-Processing included sanding it with 120 grit and 220 grit sandpaper, cleaning up all the edges using an X-ACTO knife, and treating it with an acetone vapor bath.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Skyrim Keychain by ccsky6 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ccsky6 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ccsky6 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).