Inspired by the Lego/Halo Mega Blok adaption remix of my "Death Star Laser Turret - Simple" done by ICanMakingThings and found here: http://www.thingiverse.com/thing:1206626, I modified my "Death Star Laser Turret - Destroyed" thing to use the same adaption base.
Since the base of the destroyed tower was nearly the same size I simply blended the bases together into one piece without the need to scale anything. So, the same scale used for the X-Wing Miniatures game pieces can now be adapted to a Lego or Halo Mega Bloks set.
Two STL files are uploaded. One with just the destroyed base adapted and the other with a complete assembly of all 4 parts so you do not need to search them out through the remix links. They are Cura scaled and oriented for printing.
UPDATE: 5/29/2017 An STL file of a simple short barrel version of the guns has been added to the download files. The short barrel version is interchangeable with the previous guns.
Follow the same instructions as the files this was remixed from.
A 5 to 10 line brim will help the small surface area of the first layer stick to the bed. A 0.8 mm shell and top and bottom surfaces seems to work well. A good part cooling fan greatly helps in bridging across the support material.
The full assembly prints in around 4 - 4.5 hours.
Just the destroyed base adaption will print in about 2 - 2.,5 hours.
Fit and finish
The Lego/Mega Blok adaption will be a very snug fit. I recommend that the filament used be calibrated using these calibration pieces found here: http://www.thingiverse.com/thing:1037301.
Same surface clean up and instructions apply to these pieces as described in the files these were remixed from.