description from Chuck314159:
This is a low profile conversion kit for the ZMR250 V2. It includes a 28x28 camera mount on two screws to allow adjustable tilt. I am using a sony mini HAD which fits perfectly!
The skirt is designed for use with 3mm thick arms.
I use it with two carbon bottom plates and 30mm M3 bolts and it is really strong.
this version is modified to fit XT60, and is vented: it comes at 37g.
ZMR_LowRacer_V2_4mm vented left XT60.stl:
same as above for 4mm arms
ZMR_LowRacer_V2_3mm vented left XT60-middle arm.stl:
this version has middle arms to use spacers as dampers, and lower the CoG.
(this version might need to thicken a bit the spacer around the arm when done in flexi PLA: I will update if needed)
ZMR_LowRacer_V2_3mm vented left XT60-middle 3MM arm separated.stl:
same as above with detached bottom spacer to ease access to camera.
ZMR_LowRacer_V2_3mm vented left XT60-middle 3MM arm separated - 32x32 cam.stl:
same as above for bigger cameras.
PS: I plan on adding USB hole on the side, lower hight to 14mm, and modify arm spacer to get material on both side of the arm to use spacers as damper when thing made with Flexi PLA.