Vortex Pro accessories
by ImmersionRC, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These are parts that bolt on to the ImmersionRC Vortex Pro.
The feet are designed for parking racing, so the screws don't wear when the quad slides on the floor. note the mounting screws do not make an equilateral triangle but an isosceles triangle, i.e. rotate the part if it doesn't fit correctly.
Inspired by Rotoboy, the Bumper scoop is designed to prevent the ground from titling the camera if you use an extreme camera angle. I made two thicknesses; 2mm or 3mm, depending on if you want it lighter or stronger.
You can use 4x the feet alone, or 2x feet in the rear and 1x the bumper scoop.
Edit: I added a higher foot so the vortex sits horizontally when using 1 bumper scoop and 2 feet.
Looking for the something similar for the original Vortex? http://www.thingiverse.com/thing:1248606
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Vortex Pro accessories by ImmersionRC is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ImmersionRC a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ImmersionRC would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).