Shy Rockabilly Extruder
by mairas, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The Shy Rockabilly Extruder is a remix of the B'Struder universal Bowden extruder. The basic design ideas are the same but the remix allows for parametric modification of model details such as filament thickness and bearing details. The extruder arm has a lower profile and it requires only two bearings instead of original three.
Like the original B'Struder, the Shy Rockabilly Extruder uses 623 bearings (only two needed). M3 nuts and screws are used for putting everything together. This variant is made for a Mk8 drive gear and a M5 threaded tube connector. Add a 10mm diameter spring to tension the arm.
I have printed different design iterations from both ABS and PLA and both work fine with moderate infill. The extruder face can be printed as is. The arm can be printed upside down without supports or in the original orientation with supports enabled. Without supports, the bearing enclosures come out a bit messy but the arm is still usable.
The design works flawlessly with my large kossel-style delta printer.
The thing is designed using Autodesk Fusion 360. The original design files are available for modification here:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Shy Rockabilly Extruder by mairas is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mairas a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mairas would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).