Holder For Printrboard
by MSollack, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I had the bad experience of having the USB socket come off of my Printrboard so I made a base to hold the board with a place to hold down the USB cable with a tie wrap.
Print the part.
3 mm screws may be pressed in from the bottom of the holder to form studs for mounting.
Optionally 3 mm nuts can be pressed in from the bottom to allow the printrboard to be attached with screws from the top.
Depending on the thickness of your USB plug the printrboard may need to be shimmed up with washers, or the USB plug may need to have a shim placed under it
Plug in the USB cable and secure with a tie wrap.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Holder For Printrboard by MSollack is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MSollack a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MSollack would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).