Hi there, this is my first thing, I made this for my specific needs, I have a self made Tall-Z Printrbot+ and borrowed some ideas from things found here, I would like some opinions to know if this is printable because as you see the top part is wider than the rest and I intend to print this vertically.
This is also the first project I have ever made on SketchUp or any other design software for that matter.
The second thing has some rounded edges.
Here is how it works (in theory)
1.Print 1 left and 1 right (still not uploaded).
2.Insert into corresponding 12mm smooth rod.
3.Also make sure it inserts on the 5mm threaded rod as well.
4.Add a 5/16 threaded rod at the back, joining the 2 smooth rods and use corresponding nuts to hold it in place.
6.Add another 5/16 threaded rod at the top, joining the 2 smooth rods and use corresponding nuts to hold in place.
The top rod is used as a filament spool holder.