Loading
RichRap

Yoda - Lite - more face less robe and a bit bigger

by RichRap Oct 7, 2011
Download All Files

Thing Apps Enabled

Please Login to Comment

Printed with minimal overhangs problems at 120% size, 0.2mm/layer, 20% infill, no support, 3 perimeters, 4 bottom solid layers, 6 top solid layers.

I'd like to print this at 2X. Anyone have any luck slicing this thing in Slic3r at that size?

awesome model BUT how the heck does anyone print a vertex in space like the bottom of his chin?!?! Printer just tries to deposit plastic in thin air....

Ditto with Slic3r. I guess this can only be printed with support.

The 70mm_Faberdashery_Yoda-Lite_less_robe.stl file has a flat top to the head, I assume this is an error, as the other model does not?

Yes he does have a small flat on the top of his head, I found he printed better without the domed top and at the time it also maxed out the Z height of my Prusa Printer!

Great model, but ... he's not 70 mm high. He's nearly 96 mm high!

I didn't check and I couldn't finish the print on my Huxley :(

Oops ! - You are correct, it's the wrong model, that was the scales up one before I sliced off the bottom, sorry - I will upload the Real sliced model.

Looks like out of 170 downloads you were the only one to spot this! =-O

The real one is 70.89mm high so should fit on a Huxley.

Cheers,

Rich.

This is awesome! I'm printing as we speak, but how does one keep the printer from thinking every other layer is a bridge?

I added a shell and set 0 infill, but most layers sfact seems to think are bridges.