Loading
inornate

BLTouch auto leveling sensor (dummy prop)

by inornate Dec 28, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks, very helpful for my own design.

I think they "neck" (round part just under mounting tab) may be a little fat? My mount, which fits the device but pretty tight, is WAY undersized to fit your model.

That part is a wrap of tape and a label, and it squishes quite a bit.

Lastly: The Spec'd difference between the bottom of plastic and nozzle height is 8.3 mm, so I made a version with a pin at that height since if you reference the nozzle tips you automatically get the probe mount Z location.

Thanks youuuuuu !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

thank you!!

the china rip-off "3DTouch" (i bought) has the same dimensions. so you can modify your title if you want :-)

Thank you very much !!
I'm working on solidworks and i use STL files each time it's possible , no need of mesurements , of tools , i just design with my computer

Thank you very much to share this model

Steeve

Just what I was looking for! Thanks for helping me be lazy.

I believe the mount on this sensor is the wrong size. If I am reading the drawing properly Here, the mount is 2.3mm thick, not 3.3mm as shown in this model.

You're right. I misread the dimension. The files are updated. Thanks!