Gen 6 Electronics enclosure
by Logzy, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a forced cooling enclosure i created to suit the Gen 6 electronics.
The fan duct is glued onto the main cover as im too lazy to change it to a snap on, plus glued could have several advantages.
The cover snaps onto the base and a 40mm fan is attached to the fan duct.
This creates a wider higher pressure flow of air for cooling in the important places.
It provides good forced cooling keeping the board cool.
Print all 3 parts.
Mount base under Gen 6 PCB
Glue fan duct to main cover
Snap cover onto base.
Connect all electrical connections on Gen 6 board.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Gen 6 Electronics enclosure by Logzy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Logzy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Logzy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).