this is a mud guard for mtb.
For the installation are required a couple of zip ties.
It is 180mm wide, and 170mm long.
you can mount it on the fork, or on the upper chainstay.
I have tested the 0.6 version (0.6mm high) and it is flexible and strong enough.
the wider version is a couple of cm wider.
if you want to print the 0.9 version I ask you to post a photo, or a comment .
printed with PLA and Cura
layer height 0.3
shell thikness 0.8 with 0.4 noozle