Atari 800 Pi 2 Case
by Tklus, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Atari 800 Raspberry pi 2 case. I will upload pics of the print. hoping to print one this weekend.
I have updated the files and added "mouse ears" to keep the print from warping upward.
I found it best to print both top and bottom with the outside up.
the spacer goes on the left rear corner for bolting the pi down. holes are set for using 4-40 screws. 3 nylon screws to bolt the pi to the lower case and 4 screws for bolting the halves together.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Atari 800 Pi 2 Case by Tklus is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Tklus a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Tklus would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).