This is a small box for a 12mm switch.
Easy and cheap to print.
I was tired of having to reach down wit my foot to torn my light on and of with the floor switch..
So I decided to make it easy and mount a normal light switch on the wall next to the desk.
But I didnt have any laying around...
What I did have was a 230V switch I baught on the street in Shanghai when I was there in the spring 2015 :)
Finally that came in handy!!..
So this it what I designed this simple box around.
Mush better then a normal light switch.. this has a more geeky look to it ;) thats what we al want :)
I used it as a light switch.. you can find hundreds of other things to use it for..
like rocket launch or catapult car seat ;)
Update: I uploaded the box and lid separately if anyone only needs one of the pieces ;)
Both box and lid is in the same file.
Place them standing so the box faces with the opening up and the lid lays on the bed.
You will need 4 screws to hang the box up. The screws works as both mount screws and close screws. The box has holes on the bottom... I added a piece of double sided tape on the back of the box to hold it sturdy in place while mounting it up :)
The hole on the side where the cables get in and out is 20mm in diameter.
I placed rubber cable leadtrough (don't know the word) in the hole for saftey.
- The hole for the switch is 12mm