Counting Coin Trays
by SuperAmi, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is just a quick coin tray that I made. I started with a minimal one, but it didn't print well, I then moved on to a printable straight tray designed for one roll of coins. Then I created this offset one. Each of the three designs are in the scad, and each one corresponds to one roll of coins.
The STL files are for 2â‚¬, 1â‚¬, 0.50â‚¬, 0.20â‚¬ and 0.10â‚¬ coins respectively. They are also adjusted to the tolerances of my Thingomatic Mk6. The scad has a parametric cointray() module, that can easily be adjusted to any size coin, as well as any number of coins per counting offset, or to a different printing tolerance.
The counting tray is easy to load and unload, and should be useful to anyone who needs to count small amounts of change.
I had originally planned on printing them all on one tray, but that is larger than will fit in my printing bed.
You can try directly printing the STL files.
For for non-Euro based currency you can open up the scad and add your own coin measurements and generate STLs accordingly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Counting Coin Trays by SuperAmi is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SuperAmi a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SuperAmi would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).