The Helm of Glencairn
by 4MULE8, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Legends tell of a mighty Viking-themed lid designed for a whisky glass. Behold, the Helm of Glencairn!
This is designed to fit a Glencairn glass with a rim of inner-diameter of 42mm and outer-diameter of 46mm. You may wish to scale the model up or down slightly to fit other glasses.
Designed and modelled with Blender, prepared and exported with 3ds Max.
Designed to print without additional supports. There are two supports already included in the STL file, which snap off cleanly after printing.
There is a small amount of "bridging" on the inside when printing this model, so for best results print with a layer height of 0.1mm or thicker.
Upgrade this Thing with Thingiverse AppsPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
The Helm of Glencairn by 4MULE8 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 4MULE8 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 4MULE8 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).