Heating Radiator Thermostat Adapter M28x1,5 to M30x1,5 e.g. for eQ-3 Thermostat
by bowilab, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Thermostat adapter which allows using modern electronic thermostats with M30x1,5 threads on (older) M28x1,5 radiator mounts.
The adapter consists of two parts. The pin has been designed with a length of 20 mm (4.4 mm diameter). Different thermostats/radiators may require a different length.
The adapter has to be printed in ABS (or any other material with a high melting point). PLA gets too soft when the radiator heats up.
The adapter can be printed with or without support. It has to be printed in ABS (or other materials with a high melting point) due to thermal stability. PLA is not suitable.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Heating Radiator Thermostat Adapter M28x1,5 to M30x1,5 e.g. for eQ-3 Thermostat by bowilab is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bowilab a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bowilab would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).