Ultimaker spool bracket ( for small spindle )
by FlynnProductDesign, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
There are many suppliers of PLA and ABS for the UItimaker. Yet they all use different sized spools for the filament. We made this to fit a most sizes your going to find.
Recommended build orientation as pictured. with Support material touching bed. 3mm wall. %60 Fill. Max layer 0.15mm. min layer time 8 sec.
If the small bolts on the ultimaker body are protruding a long way you may need to trim the part to get a better fit.
If you build this too fast your exposing the weakest "grain" direction in the material to the load of the spool, so build it strong. Hope it comes in handy!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Ultimaker spool bracket ( for small spindle ) by FlynnProductDesign is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FlynnProductDesign a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FlynnProductDesign would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).