Idler pulley bracket replacement for Geeetech i3 X
by lukie80, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A replacement for the metal U-bracket with a M4 screw. The metal one already destroyed two rotational bearings by abrasion. See photo. Now the plastic pulley will wear until a stable state/position is reached. A M4 thread is included making assembly easier. Print with 100% infill for maximum strength.
In my case (Geeetech acrylic) this is a obligatory replacement.
Supports are included. Drill a 4mm hole through the thin walls on the side.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Idler pulley bracket replacement for Geeetech i3 X by lukie80 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving lukie80 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure lukie80 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).