These are the parts to hold duet 0.8.5 under build platform of the kossel mini
with 2020 extrusions. In particular for the base side extrusions of 24cm. It
also includes feet to raise the printer above the table and optional rubber
shoes (to be printed rubber filament) for the said feet. They make the whole
thing much more quiet.
I do not have panel due and do not plan to have so I don't know whether it
plays along well.
To make use of the thing you need to print 3 feet, 4 holder parts and
optionally 3 rubber shoes.
In addition you'll need
- 3 M5 nuts
- 3 M5x20 screws
- M5 tap
- 4 T-Nuts
- 8 M3x10 screws (or 4 M3x10 and 4 M3x8 or M3X6 screws)
- 4 M3 nuts
Once you have all that, you basically follow your heart and provided pictures to put it all together.
I have attached both original STLs and netfabb-repaired. Just in case.
2016-09-10: Have just confirmed DuetWifi has the same dimensions.