Parametric Z base printed clamp/spacer
by triffid_hunter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Prusa's rod clamps are all well and fine, but I don't actually want to adjust the spacing from Z smooth rod to frame.
Here's a one-piece connector with optional bearing holder.
Fully parametric, including rod spacing. Match with blddk's derivative of my Integrated Z motor mount+frame vertex+rod clamp - http://www.thingiverse.com/thing:12215
Overall size of the part comes mostly from washer_diameter and the spacing distances.
horiz_distance is the distance between the center of the smooth rod clamp and the threaded rod that goes under the middle of your printer. This can be made smaller (minimum smooth_rod_diameter/2+threaded_rod_diameter/2) if you omit the bearing mount.
UPDATED 9 November
uploaded new files with proper distances, preset to the standard, and M8 holes
2) disassemble half your printer to install
Edit, personalize, or revise this Thing
Parametric Z base printed clamp/spacer by triffid_hunter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving triffid_hunter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure triffid_hunter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).