Loading
SuarezLuis

X,Y,Z Calibration thing

by SuarezLuis Jan 26, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

very smart - thanks!

So what are the steps to use this to calibrate steps per MM. BTW, I had to shrink this down to 50x50x50 on the last indicator. Only took just over 1 hour to print that way (With a 20% infill)

After you print ti take measurements on each axis. if your print is too big reduce steps per mm if its to small increase steps per mm

https://www.youtube.com/watch?v=Mbn1ckR86Z8