by chibcha8, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A remodel of TBSkinner's piNES. I didn't like how the usb outlets were facing back and the power cable facing forward, so i switched them around, since I'll be using it to emulate, now i can have the controller facing me and the power in the back.
Unfortunately with this edit I had to block the RCA video output and the AUX output, but if you're using HDMI to connect to a monitor, then you're fine. But if somebody really wants, I can try to rearrange it to have access to them.
EDIT: After i printed it i realized that it was pretty small and didnt comfortably fit my HDMI cable without bending it, so I upscaled it so that the HDMI cable has more space to move, it still fits onto a standard Replicator 2 Print area. It also requires minor sanding/filing, so if i get a chance I'll try to fix that.
I printed my parts with two shells, and 15% infill. I have been having a warping problem with this print, so to counter that i printed the top and bottom halves with a raft. every part can be placed so that it does not need supports.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
NES pi by chibcha8 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving chibcha8 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure chibcha8 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).