Schwarz P Surface #1
by dennedesigns, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Here is a Schwarz P surface that Dave Pfaff and I designed for the InforMath project funded by the National Science Foundation (DRL-1323587). The InforMath project (http://informalmathematics.org/) is a partnership between San Diego State University and several museums at the Balboa Park, including the Reuben H. Fleet Science Center (http://www.rhfleet.org/). A Schwarz P surface is a triply periodic minimal surface.
These models are designed to join together using small magnets. There are two options for the print files, ones with small holes for the magnets and ones without. There are two sizes of the surfaces 6x6x6cm and 10x10x10cm, and there is also a thin version of the 10cm size model.
Also prints on a MakerBot 2X with rafts, supports, 0.2mm resolution and 10% infill.
Several copies of the surface can be held together by 3mm (diameter) x 3mm (height) cylindrical rare earth magnets (http://www.gaussboys.com/store/index.php/magnet-shapes/cylinders/c0303.html).
The magnets should fit snugly, and I didn't need any glue. If you do, you could try using a little JB Weld epoxy just in case. I suspect that you could also use superglue. I highly recommend printing DesignByNumber's magnet insertion tools (http://www.thingiverse.com/thing:436565) to help seat the magnets into the little holes.
You can alternate the magnets around the rim of the surface. The rim on the opposite face should have the opposite orientation on corresponding magnets.
How I Designed This
A complete description can be found on my blog at http://mathvis.academic.wlu.edu/2016/02/29/constructing-a-schwarz-p-surface/ A very brief description of the mathematics can be found here: http://mathvis.academic.wlu.edu/2016/02/29/schwarz-p-surface-the-math/
Edit, personalize, or revise this Thing
Schwarz P Surface #1 by dennedesigns is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dennedesigns a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dennedesigns would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).