Ultimaker Bed mount adapter 4-point to 3-point leveling
by Musti, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This adapter is to convert the Ultimaker standard bed mounting with 4 alignment screws to 3 alignment screws, allowing for easier 3-point alignment.
Add this adapter and drill a 3mm hole in the middle of the two back mounting holes for the ultimaker bed. Add a spring and thats it.
With this modification simply first level the print bed on the back side where there is a single screw, then adjust the front ones.
Print from PLA.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Ultimaker Bed mount adapter 4-point to 3-point leveling by Musti is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Musti a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Musti would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).