makey makey case

by bsurfn99 Jan 30, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

It looks like the design needs a few screws to hold the case together. What kind of screws did you use?

Much appreciated looking forward to printing this


Great Question. I will make sure to include this in the description for others. I used M3 x 10mm Socket head cap screws. I do think M3 x 12mm would also work.

Great design, but I have a little question.
The new Makey Makey's have their USB-port placed more to the left.
Could you adjust your design so the new models fit in place as well?

Great design, but could you move the hole for the USB-port to the side? The new models have the USB-port placed more to the left.

I was unaware of the new board layout. I will look into it and see if I can make the change. I don't have the new board, so I'll have to look and see if I can locate where "left" is.

Thanks, if you want I can make some measurements tomorrow. And/or take a few pictures.

MeneerMark, I took a look at the makey makey site and see that they changed the side of the arrow pad they placed the USB plug. Being that I made this change via "visual reference" I also increased the side to side clearance to the plug seeing how I don't have a board to confirm location. Good luck. I look forward to your updates / comments on the update.

Printed out the new design, looked promising, but the hole still needs about 2 or 3 millimeters to the left. Right against the clearence for the screw.
I've got a student who is filing the hole to make a good fit, but if you would like to make another adjustment.... :D

Adjusted. I replaced the file, opening is right against the inside wall of the fastener. (2.5mm change) Good luck