Tom Dixon's Etch Shade inspired Lamp.
3x etch120cable x3.stl
20x etch120 x20.stl
1 x M3 bolt to restrain the wire inside the "etch120_sopcable2.stl"
Wire (5-6mm external diameter)
1 x light bulb base (maybe you need a plastic clamp to atach the wire inside the base)
96 x 2-2.5 mm width white plastic clamps to join the faces
1 x plastic clamp to make the pendant tie with the wire
1 x spotted omni directional bulb (no LED or white bulb, you need a point light or concentrated light to guet the best results). A good one is an halogen bulb http://www.cherylpettdesign.com/wp-content/uploads/2014/02/halogen.jpg