Claw Mounting Bracket for SparkFun Robotics Claw MkII
by kwoeltje, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The SparkFun Robotics Claw MkII (part # ROB-11524) is a big improvement on their mark 1 model. The new Pan/Tilt MKII bracket (part # ROB-11674) is also nice (if a tad pricey). Unfortunately the instructions to mount a claw to the Pan/Tilt bracket show the MkI claw. It wasn't apparent how I should mount the claw on the pan/tilt bracket with the included parts, so I designed this mounting bracket.
This is the first thing I've designed for printing. Done on 123D Design online. The file w/o mounting holes are in case anyone wants to shift the holes - they weren't quite aligned, so I just drilled them out to mount. Also, the file downloaded directly from the app were corrupted. The file with "_apu" was made by downloading the file through the Autodesk Print Utility app. The one with "_dt" was made by downloading the .smb file and bringing it into the desktop version of the program.
Printed the "apu" version with MakerBot Replicator 2.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Claw Mounting Bracket for SparkFun Robotics Claw MkII by kwoeltje is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving kwoeltje a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure kwoeltje would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).