Compact but very easy-to-use screwdriver holder. The funnel shape guides the tools and makes them extremely easy to place in the right position.
The tool holes and distances are designed for varying screwdriver sizes, with the front row for smaller precision drivers.
Mounting holes made for both metric (12mm) and imperial (1") center hole distance pegboards, can also be mounted directly on a wall, pinboard or table edge.
Major update, version 5. The funnels are now wider and completely seamless to make it even easier to slide in your tools. Front row connector bar removed for better view of the tips, rear connector bar stronger and better placed. Mounting holes for all models works with both metric and imperial pegboards.
A variant of the big combo holder has been added with more space between the funnels, see screwdriver holder v5B combo long
Version 6. This one have more space between the slots to accommodate larger handles. It also has fewer slots to fit smaller print beds - rotate it 45 degrees if still not enough.
A big thank you to neilbunn for his generous support.
More variants (all logo-free), such as separate big & small holders are available for less than a cup of coffee at http://cults3d.com/en/tool/screwdriver-holder-pegboard-or-wall-mounted
If you want to support my work otherwise, please consider leaving a tip or a friendly comment here on Thingiverse. :)
More tool holders mounted in the same way can be found here: https://www.thingiverse.com/FrankLumien/collections/pegboard-and-tool-accessories
Designed to be printed without supports. If you have a smaller print bed, rotate the model diagonally in your slicer.
Shown in the photos is the screwdriver_holder_v5_combo_long version, printed at 0.15mm layer height at 90mm/s.