18th Feb - Uploaded more combinations to choose from
2nd Mar - Uploaded a case version for the Scroll pHat board
SoaPiBarZero - a soap bar shaped enclosure for the Raspberry Pi Zero.
Includes cut outs for gpio, processor heat sink, activity led and access to the sd card.
The gpio can be accessed from above or below depending on the option selected and will fit a male or female header.
The heat sink opening will fit a standard 14x14mm heat sink.
I will upload various versions of the top and bottom parts with or without upper and lower gpio, heat sink and eyelet options so you can mix and match at will.
Tested in Z-ABS, Z-ULTRAT and Z-HIPS
You will need 4 x M2.5x8mm nylon screws and nuts.
If the nylon screw is longer you can trim with a sharp blade after fitting, you can also use M2.5 metal hardware if you prefer.