Contents
Tags
Remixed From
Design Tools
License


Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagMakes View More
Summary
Design based here :
http://www.thingiverse.com/thing:533029
(for E3D_v5_v6_40mm_Duct.stl and E3D_v5_v6_40mm_Duct_Mirrored.stl)
and here :
http://www.thingiverse.com/thing:958827
If you want the SINGLE fan version print :
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
E3D_v5_v6_40mm_Duct.stl
OR
E3D_v5_v6_40mm_Duct_Mirrored.stl
if you want the DUAL fan version print
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
Fan-Duck-Left - repaired - oriented.stl
AND
Fan-Duck-Right - repaired - oriented.stl
This version of fan duct is not yet tested.
Needs 4 screws M3 25mm long
2 fans 40mm left/right
1 fan 30 mm central
You might need also a zip tie in order to hold the hole system to the e3d barrel.
I am pretty sure that this version will work extremely well.
If you test it let me know in the comments below.
More info here :
http://www.trustfm.net/hardware/3DPrinter.php
I have added fan guards modifying this :
https://www.thingiverse.com/thing:128718
Print Settings
Printer Brand:
RepRap
Printer:
Prusa I3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
40%
Notes:
Try printing it without additional support.
I have used PLA at 195 degrees Celcius
How I Designed This
I have downloaded thes files :
E3D_v5_40mm_Duct.stl and
40mm_Duct_Mirrored.stl
from :
http://www.thingiverse.com/thing:533029
I have fixed them using netfabb Basic.
I have imported them to FreeCAD as new part.
Then i modified them and i have made a dual version using my fan duct holder located here :
http://www.thingiverse.com/thing:958827