This is my design for a mobile phone holder + wireless charger for Samsung Galaxy s6.
It is very similar to the table top version I uploaded before: http://www.thingiverse.com/thing:1323471
But this one is designed for car use.
I made two versions of the holding clips:
The first version was the blue ones, which works with an office rubber band as a spring.
After installing them and parking under a direct sunlight, the clips where bent so please try to avoid direct sunlight.
The second clips version are the white ones and they have an integral spring in the clip itself. another improvement in the second version is that the clips are opened by pushing the mobile phone backwards instead of pressing the clips.
I used a wireless charger from Aliexpress: http://www.aliexpress.com/item/For-SAMSUNG-GALAXY-S6-S6-Edge-LG-Nexus-4-G3-G4-HTC-8X-NOKIA-Lumia-1520/32468261502.html
but there are many similar chargers (diameter is about 70mm and thickness of 10mm).
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.