Mini FPV camera mount
by jeffwinder, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Great little design for your mini FPV camera.
Original Prusa i3
PLA .. No cooling fan support...
Mini FPV camera mount.
This design will house the small 160-170 degree mini PAL/NTSC cameras on the market now that have a 11.3mm x 3mm thick base. (NEW in v2.1 files) -->Tilt angle of the mount is from -45 degrees downward to 45 degrees upward. Takes an 8mm M3 screw and nut.
Note: If stiff movement after print, bore out only the base holes a little larger with a drill bit, this will ease up the movement just right.. :)
Video of 3d parts here ... https://www.youtube.com/watch?v=9LJoR_yk8sU&feature=youtu.be
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mini FPV camera mount by jeffwinder is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jeffwinder a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jeffwinder would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).