Indoor Sensor Case
by Sembiance, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a sensor case I designed to hold an Adafruit Perma-Proto Half-sized breadboard along with some sensors and a lithium ion battery. It has vent holes so the temperature/humidity readings inside will be accurate and also has a charge port hole so you can charge it without taking it out of the device. Has a lid that can slide on.
You will likely need supports of the sensor case itself, specifically for the charge port hole
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Indoor Sensor Case by Sembiance is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Sembiance a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Sembiance would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).