Loading
FlynnProductDesign

Print Removal Tool - Stanley Blade Adapter

by FlynnProductDesign Aug 23, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

Many thanks for your 'thing'. I printed it but I find more useful use only the left side so that the blade is free on the right side !

How do I remove this print of my board?!

it's nice, but watch out! i sliced my PEI sheet!

Works great ! thanks a lot ! ^^

Hands down the best tool for removing projects!!!

I love this gadget! I initially printed it with 0.2mm layers in PLA, and it has worked wonderfully.
Note: I used JB Weld to hold the blade in place.

Always good to know. Yes some Epoxy makes it safer and easier to use. Glad its helping someone out there :D

We found printing slow enough on the ultimaker did not fill the slit. We use this daily its a pretty handy way to have control over the pressure your applying. The egg lifter / spatula alternatives don't offer that and you can end up damaging your print. Would be nice to find longer blades however. thanks for the comment.

if you go to a crafting store that sells sculpey they will have a "knife" thats pretty much the same as a looong blade. It about 6in long i believe ;)

great concept however using PLA will seal the slit closed where you cannot put blade in. but the product itself was nice. thank you