Cable Chain mount part
by rosario3dprt, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Hi, this is my version of the mount point for the Cable Chain on the Prusa I3 Reworks with 8mm threated Rod.
I started from the one (Eje_X_acople_cadeneta_izquierda.stl) available on Prusa I3 (look at Thing Files of Hephestos http://www.thingiverse.com/thing:371842) and adapted it for my new X-Motor (derived from http://www.thingiverse.com/thing:1060272) and X-idler of my prusa I3.
This is for following cable chain http://www.thingiverse.com/thing:1078216
I already printed it and works reaaly fine.
My own Prusa I3 REwork 1.5
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Cable Chain mount part by rosario3dprt is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rosario3dprt a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rosario3dprt would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).