Ekobots - Magnetic levitator shield for arduino nano.

by jsirgado Mar 5, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi krwynn.

Great job! Thanks!
Can I put the link to the board in the description of object?

Regards Juan.

Thanks! Yes, absolutely! Do whatever you want with it. I put a link back to this page in the description on OSH Park.

Done! Thanks again... ;-)

What is the size of your board?

In the image the board have 65mm x 45mm but you need put it inside a box with the same size.
Make the board, 1mm or 2mm smaller to fit in the box, without problems.

Can only find 20mm diameter electromagnets. You have a link for 25mm? Thanks

Levitator.stl is coming up as an invalid stl file in netfabb

Hi krwynn.
The part number is: ZYE1-P25/20 12V.
You can find the same electromagnet with 9V and 24V, be careful.

This is the first in the ebay search, but you can find others...
25mm diameter, 20mm height;

The STL file in this object is an empty file, The site do not allow create an object without a .STL file.

No valid .STL files in this object, for all STL files see the object:

Ekobots - Levitator with arduino.

Hey thanks for the quick response! The link is to one 37.5mm in diameter. Will that work?
Just looked at the stl that holds the electromagnet. Max size it will hold is 26mm

Comments deleted.

My fault, it will not work and not fit...
You need a 25mm diameter.

I believe this is the correct...
This is the first in the ebay search that match, but you can find others...
But please, confirm all.

Good find. Thanks