An adapter for airsoft. This was created by mashing together two other adapters. This is a rough version, it requires filing to get it to fit in the AUG and the part that holds the AK is not as good as a normal AK mag catch. However, it is simple and easy to print and I have had no trouble with the bb feeding.
There are two files available because I have had issues with corruption. Files are fine on my pc but break on others'. v1b should be the best file. if that is corrupted or information is missing then use v1.
This file was made using these two files:
WirierEcho's Nato mag to Aug mag.
Enone's M4 Adapter for AK mag.
Thanks to them for permission to use their files and share the result with you.
It is possible that I will do a version 2 with improved AK mag catch and appearance. However, it is not a priority right now, I just did this for fun. If I do a v2 it will be a new file and this file will stay up as this file will be simpler and worth keeping around.
I am sorry but I know very little about the printing. Enone recommended printing his upside down with supports so I'll recommend the same. ¯_(ツ)_/¯
You will need to do a bit of filing to get the mag to fit in an AUG. Take it slow, avoid filing the bits that directly engage with the mag catch if you can help it. I think the main area that needs filing is the top as the adapter might be a bit tall.
I took the bits I wanted from WirierEcho and Enone's files and connected them together in Blender.