We made some experiments with our lasercutting machine and designed a box for the RAMPS electronics including our breakout board for ATX power supplies.
The intention was to make it easy to assemble without needing too much screws or even glue.
The result was a push-together system with slide-in connectors.
Apart from this single screw you don't need anything else to secure the complete box.
Of course the RAMPS and the breakout board as well as the fan have to be screwed on.
The box is designed to be mounted to the frame of the BetaPrusa 3D printer or other prusa and mendel variants.
At the front only the USB connector of the RAMPS board is visible.
The holes at the side of the box are for the wiring of the 3D printer and the connection to the ATX power supply.
This way, the RAMPS board is boxed in save so no one can touch it when it is operating. It's well ventilated with the fan and in addition it looks cool.
The 2PrintBeta team
Simply slide together all parts - almost like a 3D puzzle - and secure the last part with one single screw to prevent it from falling off.