So I was inspired by using this gimbal on my hex:
I wanted to be able to have a race copter and an option to mount a gimbal very fast and with no screws etc...
So for using this gimbal u need everything from the original gimbal, but the "roll motor mount".
Just use the attached motor mount (tb_spider_storm32_gimbal.stl) here. To use it, u will also need my "Blackout Spider Hex Landing Gear 2", that can be found here:
I used some other motors than the MotorPixie mentioned motors, so if you use this motors:
Quanum 2208 Precision Brushless Gimbal Motor (GoPRO size 100-200g):
u will need the attached "gimbal arm long" file, which is a longer version of the original gimbal.
With the new updated version, u have to remove the battery plate on the bottom.
UPDATE: Aprilm 11th 2016:
- Uploaded a new (higher) Gimbalmount -> now you have enough space for landing with gimbal.
- Storm32 housing added -> u need 2 screws (holes already at the frame) to attach it on the bottom.
Please note this is a work in progress,