The "v4" version are the same buttons as included with the Pocket Operator case. The details of the symbols will need a very small extruder when using FDM. Extrusion diameter of 0.3 mm or smaller recommended.
The "v4wide" version of the buttons has a larger diameter (0.5 mm), less fillet and slightly larger symbols. These are intended to be used when the both case and buttons are made with SLS printing. Using FDM printing these will likely not be able to move freely in the button guides of the case.
Note: A version of case, buttons and light guides optimized for SLS/SLA printing also available at shapeways: https://www.shapeways.com/shops/cdb (rendering shown as cover picture).
More from Audio
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving crashdebug a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.