Loading

SETH - 3D Printed Jointed Robot (Easy Print Slic3r Settings)

by 3DIYOriginal, published

SETH - 3D Printed Jointed Robot (Easy Print Slic3r Settings) by 3DIYOriginal Mar 12, 2016
1 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Contents

Design Tools

123D Design

Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Makes

Thing Statistics

2029Views 782Downloads Found in 3D Printing

Summary

Seth The Improved Jointed Robot.
This is a remix of the original Jointed Robot created by Shira:
http://www.thingiverse.com/thing:555242
I printed this awesome robot & I want to share with you guys my printing experience.
So, I created some files for easy print of Seth.
Here it is:
Normally for an easy print you need to change some Slic3r Settings.
Slic3r Settings for the entire print:
Infill 20 %, Layer Height 0,1mm or 1.2mm if you wish, Speed 40mm/s & shell thickness 1 or 2 depends on the print you make, next I'll specify which print needs 1 or 2 shell thickness.
My entire print was on Layer Height 0,1mm & Infill 20% - it's enough to add resistance to the robot.
Best print for this robot is to make Slic3r adjustments for each print.
Slic3r Settings for each print:
I've places numbers for each print.
The most delicate printed parts of this robot are the neck, arms and hands.
Layer Height for the entire print is 0.1mm & NO RAFTS - NO SUPPORTS.
If an STL File appear in Orange telling you about the object that is not manifold, leave it as it is, don't repaired it. You can print perfectly how it is.

  1. Left Arm 1: Infill 20%, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 5.
  2. . Right Arm 2: Infill 20%, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 5.
  3. Hands: Infill 20 %, Speed 40mm/s, Shell Thickness 1 (Perimeters), PLA Printing Temperature for this print 195ºC & print the STL file as it is, no skirt & brim.
  4. Left Boot 1: Infill 20%, Speed 40mm/s, Shell Thickness 3 (Perimeters), no Skirt & Brim, no Supports.
  5. Right Boot 2: Infill 20%, Speed 40mm/s, Shell Thickness 3 (Perimeters), no Skirt & Brim, no Supports.
  6. Head: Infill 20%, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim Distance from the object 0 & Brim Width 6, no Supports.
  7. Hip: Infill 20%, Speed 40mm/s, Shell Thickness 3 (Perimeters),
    Skirt & Brim Distance from the object 0 & Brim Width 5, no Supports.
  8. Left & Right Ball Hip: Infill 20%, Speed 40mm/s, Shell Thickness 2 (Perimeters), no Skirt & Brim, no Supports.
  9. Left Thigh 1: Infill 20 %, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 5.
  10. Right Thigh 2: Infill 20 %, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 5.
  11. Neck & Chest: Infill 60 %, Speed 40mm/s, Shell Thickness 1 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 3.
  12. Left & Right Knees: Infill 20 %, Speed 40mm/s, Shell Thickness 2 (Perimeters),
    Skirt & Brim - Distance from the object 0 & Brim Width 8.

An elastic cord is used to secure the limbs and allow for positioning - no screws required!
The elastic cord that best fits the robot is 3mm in diameter.
Note: Be careful with the joint at the base of the neck and fingers, they often remain stuck in printing, and is difficult to get moving the joint.

Youtube 3D Printing Seth Video:

https://www.youtube.com/watch?v=7WX8mPIDmx8

Youtube Assembly (Montaje) Seth Video:

https://www.youtube.com/watch?v=bcIcYmC3u8c

Youtube Video Performance:

https://www.youtube.com/watch?v=4MdZo5fkAvQ

Thanks & Enjoy This Wonderful Jointed Robot.

Follow me on instagram to see more 3D Printing:

https://www.instagram.com/d.i.y.3.d/

Thanks !!!

More from 3D Printing

view more

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

3D Print a wide range of designs with Treatstock. Easy to use tools to get the perfect result. The global 3D printing network that connects you with high-quality and fast working print services nea...

App Info Launch App
Top