Smoke Box Of Death
by anewsome, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Derived from my hinged box with latch, I remixed it a bit and sized it for a 20 pack of death.
This print is a real pain so good luck with it. It covers a pretty large area so make sure your bed is super level. My design creates a pretty large bride on the part the retains the smokes in the box, if you have good print settings then you won't see any droops or strings whatsoever.
The hinge is plenty loose. I promise this hinge will not print fused. It will swing freely as soon as you pull it off the bed. Push in on the wall with the latch to open and close it easier.
I use the Makerware Standard print setting on a Rep2.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Smoke Box Of Death by anewsome is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving anewsome a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure anewsome would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).