Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
ustkl

Phineas 3DP magnet ball-joint version

by ustkl Mar 15, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, how much space is inside for control board? I want to use Ramps-fd v2.1 (100mmx95mm) and I don't know if it will fit inside.

Hi,
I like you control panel design on thingiverse. I was wondering if you could give me the files so I can modify / extend the right hand side of the panel, by adding 2 areas to allow for cooling fan switches.
Of course I will mention your thingi file if I upload to the group.

Thanks in advance

Mike

hey - haw long must by rods (141mm fiberglass ) ? how deep fiber glass go in on the plastic tube 10x8x25mm ?

141 no need accuracy, below 145 is OK.

ok - but what long is fully assembled rods (175mm ?)

distance between magnet end is 175-10=165mm
I have tools to make it http://www.thingiverse.com/thing:1429454
http://www.thingiverse.com/thing:1543447

Phineas 3DP magnet rods making tools
by ustkl
Easy Magnet rods Making tools for Delta 3D printer
by ustkl

Hello
any suggestion of taobao shop to buy the following :

POM wheel with 625 bearing 21.5 x 7mm, 5mm round------ 12

Thx !

Hello

Since the retail version changed to use 24mm wheel. I have some 21.5mm wheel in stock. I can sell them as low price as taobao.
If you interest, please contact me in Phineas FB page.

I have trouble finding the 1515 aluminum rods in my country, Is it possible to scale the model to use 2020 instead?

try to find this on aliexpress
there should has some related items, feel free to search and buy
keyword: 1515 aluminium (extrusion)

Hello, I am planning to sell package included essential parts of Phineas 3DP. Please check my facebook page.
https://www.facebook.com/Phineas3DP/posts/688034168002412

Would be willing to share the firmware? My mechanicals are pretty much done. Just a little wiring to do.

Sorry of late reply. I just upload the marlin firmware to thing file, please check.

Thank you! This my first Delta so this is going to help a ton. I'll be sure to upload some video once I get a good print. I love the design. It exceeded my expectations when I began the build... Oh, I added a heated bed and extended the extrusions a bit too.

Hi !

Where did you found this pieces !?

  • M4 6x8x2 rectangular nuts (x21)

Thx !

Actually, I decided to sell below in a package. But I have no experience to sell oversea, need to study about it.

Bearing F104ZZ 4x10x4 ------- 6
Bearing 625 5x16x5 ------------ 6
POM wheel with 625 bearing 21.5 x 7mm, 5mm round------ 12
3010 FAN 12V-------------- 3
6010 FAN 12V --------------1

1515 6.2mm slot Aluminum rod length=440mm----- 3

Magnet M8x10 ------------12
Steel ball 10mm with 4mm screw hole ---------12
8x6mm fiber glass length=141mm ------------6
plastic tube 10x8x25mm 12

PTFE Tube 4x2mm length=400mm---------------1
PTFE Tube 5x3 length= 4-5mm ------------------18
4x15mmOD O-ring --------------------------------3

Screws
M4 hex nuts-----------------------21
M4 6x8x2 rectangular nuts--------21
M3 hex nuts-----------------------40
M3 hex nuts Prevailing Torque-----6
M3 12x1 washer--------------------12
M3 7x3 plastic washer--------------12
M3 spring washer-------------------6
M4x8 Socket Button screw---------24
M4x10 Socket Button screw--------27
M4x18 Socket Countersunk screw--3
M3x6 Self tapping screw------------8
M3x8 Socket Head screw-----------13
M3x14 Socket Button screw--------16
M3x16 Socket Head screw----------18
M3x25 Socket Head screw-----------6
M2.5x8 Socket Head screw----------3
M2.3x6 Countersunk self tap-------12

Comments deleted.