by druppy, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Print the test, push with your finger over each botton in descending order. The last one botton you can push out from the tester indicates the value of the gap to be considered in the design phase in order to allow the insertion of a pin into a hole.
The gap is reported to the diameters.
I know... it looks like a blast of pils... but it's nice! and useful in the same way! HAHA!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
tolerance test by druppy is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving druppy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure druppy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).