Eclips3d adjustable Z Endstop
by cporto, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an adjustable Z endstop for the Eclips3d printer, with a handy wire run on the bottom for the heat bed wires.
First loosen the bolt on the z-collar and slide adjuster into place. Tighten the bolt back on, you might need to keep a finger on the adjuster as the bolt cuts threads into the plastic.
Second, I recommend manually raising the bed to touch the heat end, with what ever surface you've installed on the bed. Then raise the adjuster to trigger the endstop. Tighten the screw to lock it into place.
Lastly, level your bed.
I printed with 2 walls using white PLA by maker geeks. Make sure to rotate the objects on their side. This will print without any supports.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Eclips3d adjustable Z Endstop by cporto is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving cporto a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cporto would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).