rc katamaran sailboat
by PrinzTom, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The step file can be found here, so you can improve or costumize it on your own:
Foresail and keel is added, it improved steering a lot.
Files for the clip-on-keel added...
The boat hull have to be printed with very low infill for low weight. I used 6% Infill.
I made the hull out of PETG and the other parts out of PLA and sprayed the hull with clearcoat for water tightness.
The pipes are 6mm and 10mm carbon fiber pipes and the connection between thr rudder and the rudder arm is made of 3mm cfk pipe just as the steering rods to the servos.
I use ball bearings for the main beam and a knurled nut for the beam adjustment.
The hinges at the beam suspention are made with 4mm teflon tube.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
rc katamaran sailboat by PrinzTom is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving PrinzTom a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PrinzTom would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).